| Model number | use |
| Soft bubble catalyst | A-300 | It is designed for delayed gel catalysts, good liquidity, low or non -corrosiveness, and good openingability. It is designed for molding polyurethane foam production. |
| A-300D | For delayed gel catalysts, it has good liquidity, lower odor, and good holes. It is designed for production of polyurethane foam. |
| A-400 | Delayed foam catalysts, improve liquidity, are suitable for molding foam plastics, which are used in the production of car cushions and back foam, and low corrosion. |
| C-225 | The delayed balance catalyst allows the foaming system to have excellent liquidity, which is conducive to large and complex molds or shortening the molding time, and is used for the production of high -bullet polyurethane products. |
| A-1 | 70%of the two (dilateine -based ethyl) ether and 30%of the new glycol, strong foam catalysts, low distribution features. Suitable for various polyurethane foam equipment. |
| KC101 | Gel catalysts with delayed effects can improve liquidity or shorten the molding time. |
| SYD-A33 | A 33%tireyl -liquid liquid catalyst. This high -active unprepre catalyst promotes the reaction of isocyanate and polyol. If you cooperate with A-1, you can get the best performance. |
| SYDPA-A33 | Low -smell, low atomization and low VOC reactor gel catalyst, have a higher gel balance effect than other catalysts. Suitable for high -end polyurethane soft sponge production. |
| 9727 | It is a balanced composite catalyst with high catalytic efficiency and low dosage. Suitable for the production of soft polyurethane foam with various density. It can improve the foaming speed and increase the hardness of the foam to a certain extent. |
| SMP | It is specially designed and used in the production of low -density foam. It can play the effect of foaming without cracking and improving hardness. It has uniqueness, which makes the foam more easy to solidify. It is easy to operate in production and is not easy to stick paper. |
| T9 | The manufacturing of bitter tin and polyurethane foam, due to its average activity and excellent stability, it is more suitable for economic, high -speed and large bubble production than general acetic acid tin products. |
| T12 | The gel catalysts suitable for soft high -return polyurethane foam plastic production are particularly significant in economic, high -speed, and large foam production. They have the highest catalytic activity and easy -to -control catalytic stability to achieve the least foam loss. |
| Hard bubble catalyst | SY-PC5 | Amine foam catalysts are widely used in various polyurethane hard bubbles, including polyticocyan uric acid ester plate hard bubbles. |
| SY-PC8 | The amine balance catalyst is used for hard bubbles, plates, and pouring polyurethane hard bubbles on the spot, which has a catalyst effect on gel and foam. |
| SY-PC15 | The reactive catalyst, the structure is lively hydrogen, is mainly used for polyurethane foam with higher odor requirements, and has prominent liquidity and balance. |
| SY-PC41 | Polyurethane high -active trimer catalysts with excellent foaming and gel capabilities are commonly used in layer -made polyurethane polyurethane, spraying hard bubbles, and molding hard bubbles. |
| SY-BDMA | Rich catalysis of the epidermis. Commonly used in industries such as polyurethane refrigerators, plate materials and other industries, and can also be used in polyester polyurethane block soft bubbles. |
| SYF-33 | Amine high -active gel catalyst. |
| SY-TMR2 | Daily ammonium salt delay trimer reaction catalyst. |
| other | TotohyleneSolid amine | White, pale yellow, crystal solid. |
| Polyurethane shoe material (C material) | Low smell and fast maturity. |
| Ethylene | Ganol, colorless, odorless, and began to taste sweet and bitter, which has a thick and bitter liquid, which has hygroscopic absorption. |
| Meol | One shrinking dizenyl, colorless, odorless, slightly sticky liquid, has hygroscopicity. |
| Diethanolamine | Liquid, solidification, mild, ammonia flavor. |
| Triethanolamine | Liquid or solid, colorless or pale yellow, slightly ammonia. |
